Main Motor FWD/REV

The knob provides selection of Main Motor forward ( FWD ) or reverse ( REV ) rotation. If the knob is in the REV position, the slide can only be operated in INCHING mode, and it can only reach the T.D.C range. If the slide reached the T.D.C. range, the slide cannot be operated.

Main Motor Start

When the Operation Mode Selection Switch is in the OFF position, the Main Motor will start as soon as the Main Motor Start button is pressed.

Main Motor Stop

The Main Motor will stop as soon as the Main Motor Stop button is pressed.

RPM Adjustment

RPM of the Main Motor can be adjusted by turning this knob.